Crown Audio Amplifier Rental – CDi2000
Product Weight: 19 lbs
Dimensions: 19″W x 3.5″H x 12.25″ D
Minimum Guaranteed Power (With 0.5% THD)
Per channel, both channels driven
2 Ω Dual (per channel): 1,000W*
4 Ω Dual (per channel): 800W
8 Ω Dual (per channel): 475W
4 Ω Bridge-Mono: 2,000W*
70V Dual (per channel): 800W
140V Bridge-Mono: 1,600W
*With 1% THD
Frequency Response (at 1 watt into 4 Ω, 20Hz – 20 kHz): 0/–1 dB
Signal to Noise Ratio (below rated 8 Ω power at 1 kHz, A-weighted): 100 dB
Damping Factor (8 Ω): 20 Hz to 400 Hz: > 500
Input Stage: Input is electronically balanced and employs precision 1% resistors
Crosstalk (below rated power) 20 Hz to 1 kHz: > 70 dB
Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Dual: 2–8 Ω
Bridge mono: 4–16 Ω
Voltage Gain (at 1 kHz, 8 Ω rated output): 32.9 dB
Sensitivity (at 8 Ω rated output): 1.4V
Maximum Input Signal: 22 dBu typical
Power Supply: Switch-mode Universal
AC Line Voltage and Frequency Configurations Available (± 10%): 100V, 120V-240V, 50/60 Hz
AC Line Current: 11.93A. Draws no more than 45W at idle.
Ventilation: Flow-through ventilation from front to back
Cooling: Heat sinks and proportional-speed fan
Operating Temperature: 32°F to 104°F at 95% relative humidity (non-condensing)
