Panasonic PT-DZ870UK Projector Rental

Panasonic HD Projector Rental

With its compact size, 8,500 lumens of brightness, and WUXGA (1,920 x 1,200 at 16:10 aspect ratio) resolution, this affordable workhorse is quickly becoming the standard for large breakout rooms and small-to-medium main events.

Product Weight:  40.3 lbs
Dimensions:  19.6″W x 7.9″H x 21.9″D

General
System: DLP™ chip x 1, DLP™ projection system
DLP Panel size: 17 mm (0.67 in) diagonal
Pixels: 2,304,000 (1,920 x 1,200), total of 2,304,000 pixels
Aspect ratio: 16:10
Brightness: 8,500 lm (dual-lamp, lamp mode NORMAL)
Portrait mode: 10,600 lm maximum brightness
Center-to-corner uniformity: 90%
Contrast: 10,000:1 (full on/off, in DYNAMIC IRIS 3 mode)
Resolution: 1,920 x 1,200 pixels
Screen size (diagonal)
1.27 to 15.24 m (50 to 600 in)
1.27 to 5.08 m (50 to 200 in) with the ET-DLE055, 16:10 aspect ratio
2.54 to 8.89 m (100 to 350 in) with the ET-DLE030, 16:10 aspect ratio
Lens: Powered zoom/focus lenses (1.7-2.4:1), F 1.7-1.9, f25.6-35.7 mm
Lamp: 420 W UHM lamps x 2

Scanning frequency (SDI)
SDI
3G-SDI [RGB 4:4:4 12-bit/10-bit]: SMPTE ST 424 compliant, 1125(1080)/50i, 1125(1080)/60i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p
3G-SDI [YPBPR 4:2:2 10-bit]: SMPTE ST 424 compliant, 1125(1080)/50p, 1125(1080)/60p
HD-SDI [YCBCR 4:2:2 10-bit]: SMPTE ST 292 compliant, 750(720)/50p, 750(720)/60p, 1125(1035)/60i, 1125(1080)/50i, 1125(1080)/60i, 1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF, 1125(1080)/30p
SD-SDI [YCBCR 4:2:2 10-bit]: SMPTE ST 259 compliant, 525i(480i), 625i(576i)
HDMI/DVI-D: fH:15-100kHz, fV:12-124 Hz, dot clock 25-162 MHz
RGB: fH: 15-100 kHz, fV: 24-120 Hz, dot clock 162 MHz or lower
YPBPR (YCBCR)
525i (480i): fH: 15.75 kHz, f V: 60 Hz
625i (576i): fH: 15.63 kHz, f V: 50 Hz
525p (480p): fH: 31.50 kHz, f V: 60 Hz
625p (576p): fH: 31.25 kHz, f V: 50 Hz
750 (720)/60p: fH: 45.00 kHz, f V: 60 Hz
750 (720)/50p: fH: 37.50 kHz, f V: 50 Hz
1125 (1035)/60i: fH: 33.75 kHz, f V: 60 Hz
1125 (1080)/60i: fH: 33.75 kHz, f V: 60 Hz
1125 (1080)/50i: fH: 28.13 kHz, f V: 50 Hz
1125 (1080)/25p: fH: 28.13 kHz, f V: 25 Hz
1125 (1080)/24p: fH: 27.00 kHz, f V: 24 Hz
1125 (1080)/24sF: fH: 27.00 kHz, f V: 48 Hz
1125 (1080)/30p: fH: 33.75 kHz, f V: 30 Hz
1125 (1080)/60p: fH: 67.50 kHz, f V: 60 Hz
1125 (1080)/50p: fH: 56.25 kHz, f V: 50 Hz
Video/S-Video
NTSC/NTSC4.43/PAL-M/PAL60: fH: 15.75 kHz, fV: 60 Hz
PAL/PAL-N/SECAM: fH: 15.63 kHz, fV: 50 Hz

Optical Axis Shift
Vertical: 50% (powered)
Horizontal: 10% (powered)

Keystone correction Range
Vertical: ±40° (±30° with the ET-DLE050/ET-DLE085), vertical 5° with the ET-DLE030
Using only the KEYSTONE correction of the Geometric Adjustment Function: Vertical ±40° and horizontal ±15°
With the ET-DLE085/ET-DLE055: Vertical ±40° and horizontal ±15°
Using both the KEYSTONE and CURVED corrections of the Geometric Adjustment function
With the ET-DLE085/ET-DLE055: Vertical ±20° and horizontal ±8°
With optional Upgrade Kit ET-UK20: Vertical ±45° and horizontal ±40°
With the ET-DLE085/ET-DLE055: Vertical ±22° and horizontal ±15°
With the ET-DLE030: Vertical 8° and horizontal 8°

Terminals
SDI 1 IN: BNC x 1 (3G/HD/SD-SDI)
HDMI IN: HDMI 19-pin x 1 (Deep Color, compatible with HDCP)
525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p
1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF
VGA (640 x 480) – WUXGA (1920 x 1200), dot clock 25-162 MHz
DVI-D in: DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, single link only)
525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p
1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF
VGA (640 x 480) – WUXGA (1920 x 1200), dot clock 25-162 MHz
RGB 1 IN: BNC x 5
R: 0.7 Vp-p, 75 ohms
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: Sync/HD and VD terminals do not accept tri-level sync signals.
YPBPR (Y, CB, CR)
Y:1.0 Vp-p (including sync signal)
PB/PR (PB/PR): 0.7 Vp-p, 75 ohms
S-Video signal
Y: 1.0 Vp-p
C: 0.286 Vp-p, 75 ohms
RGB 2 IN: D-Sub HD 15-pin (female) x 1
R: 0.7 Vp-p, 75 ohms
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: Sync/HD and VD terminals do not accept tri-level sync signals.
YPBPR (Y, CB, CR)
Y:1.0 Vp-p (including sync signal)
PB/PR (PB/PR): 0.7 Vp-p, 75 ohms
3D SYNC 1 IN/OUT: BNC x 1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance
Output: TTL, max. 10 mA
3D SYNC 2 OUT:  BNC x 1, 1.0 Vp-p, 75 ohms, max 10 mA
VIDEO In: BNC x 1, 1.0 Vp-p, 75 ohms
SERIAL IN: D-sub 9-pin (female) x 1 for external control (RS-232C compliant)
SERIAL OUT: D-sub 9-pin (male) x 1 for link control (RS-232C compliant)
REMOTE 1 IN: M3 x 1 for wired remote control
REMOTE 1 OUT: M3 x 1 for link control
REMOTE 2 IN: D-sub 9-pin (female) x 1 for external control (parallel)
LAN/DIGITAL LINK: RJ-45 x 1 for network and DIGITAL LINK (video/network/serial control) connection, 100Base-TX
Compatible with Art-Net, compliant with PJLink™ (class 1), Deep Color compatible with HDCP
525i(480i), 625i(576i), 525p(480p), 625p(576p), 750(720)/60p, 750(720)/50p
1125(1080)/30p, 1125(1080)/60p, 1125(1080)/50p, 1125(1080)/60i, 1125(1080)/50i
1125(1080)/25p, 1125(1080)/24p, 1125(1080)/24sF

Remote Control Unit
Power supply: 3 VDC (AAA type battery x 2)
Operation range: Appox 98.5 ft (30m) when operated directly in front of signal receptor
Dimensions: 1.9″W x 5.2″H x 1″D (48 x 145 x 27 mm)
Weight: 0.25 lb (102 g)

Power
Requirements: 120 VAC, 220-240 VAC, 50/60 Hz
Power Consumption
120 VAC: 1,030 W (1,060 VA)
Standby set to eco: 0.3 W
Standby set to normal: 3 W
Dissipation BTUs
120 V: max. 3,413 BTU/hour (without light output: 3,249 BTU/hour)
220-240 V: max. 3,311 BTU/hour (without light output: 3,147 BTU/hour)

Physical
Dimensions: 19.6″W x 7.9″H x 21.9″D (530 x 200 x 556 mm) with supplied lens and legs at shortest position.
Weight: Approximately 40.3 lbs (18.3 kg), excluding lens.
Operation noise with dual lamp operation
Lamp NORMAL mode: 40dB
Lamp ECO mode: 35dB
Installation: Ceiling/floor, front/rear
Cabinet materials: Molded plastic
Power cord length: 9’10” (3.0 m)

Environmental
Operating temperature: 32°F to 113°F (0° to 45°C )
Operating humidity: 10% to 80% (no condensation)

Note: Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards.