Crown Audio Amplifier Rental – I-T6000

Name: Crown Audio Amp Rental
SKU: 3658
Availability: InStock

We offer audio amplifier amp rentals in Orlando Florida. Rent hire top audio sound equipment technologies from Orlando’s longtime trusted rental source. Serving the industry with convention conference trade show meeting rentals, AV production and staging rental, and events of all kind throughout Orlando central Florida area and beyond with technology rental excellence since 1995. We have the perfect rental solution to ensure your event show is a complete success.

This I-Tech Series amp offers amazing power, light weight and ease of use for touring sound applications. Onboard DSP (Digital Signal Processing) provides a wide array of signal processing, including compression, limiting, and filters, greatly reducing the need for rack components and rack wiring. The DSP features 24-bit, 96 kHz A/D and D/A converters. All models in the I-Tech Series are compatible with the IQ Network and TCP/IQ networking.Pushbutton DSP presets simplify the setup. Custom presets can be downloaded into the amplifier, making it easy to configure for various loudspeaker arrays. The Global Power Supply works anywhere in the world, and offers PFC (Power Factor Correction) and is a switching power supply for reduced weight.

Input Sensitivity (volts RMS) for rated output: Adjustable in 0.1V steps from 1.4V to 7.75V
Voltage Gain for full rated power at 8 Ω: 37.9 dB to 23.0 dB
Frequency Response (at 1 watt, 20Hz – 20 kHz): ± 0.25 dB
Signal to Noise Ratio below rated full-bandwidth power, A-weighted: > 105 dB
Total Harmonic Distortion (THD) at full rated power: < 0.35%
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to –35 dB: < 0.35%
Maximum Input Level: 15 dBu or 21 dBu, depending on setting of maximum input level
Latency (analog): 1.13 mS.

A/D, D/A Converters: 24-bit 96 kHz Cirrus Logic
Digital Input: AES/EBU, 24-bit, 32-96 kHz. Onboard sample rate converter.
Network: Onboard HiQnet and TCP/IQ, compatible with standard 100Mb Ethernet hardware
DSP: 24-bit conversion with 32-bit, floating-point DSP processing
Attenuators: Speed-sensitive rotary encoders, 0.5 dB steps, range 0 to –100 dB.
Damping Factor (8 ohms): 20 Hz to 100 Hz: > 5000
Crosstalk (below rated power, 20 Hz to 1 kHz): > 80 dB
Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB
DC Output Offset (Shorted input): < ± 3 mV
Input Impedance (nominal): 20 kilohms balanced, 10 kilohms unbalanced

Load Impedance (Note: Safe with all types of loads)
Stereo: 1-2-4-8-16 Ω
Bridge Mono: 2-4-8 Ω

Power Output
Dual
2 Ohm
20 msec burst: 4,570
1 kHz: 2,500
20 Hz – 20 kHz: 2,500
4 Ohm
20 Hz – 20 kHz: 3,000
8 Ohm
20 Hz – 20 kHz: 1,500
Bridge
4 Ohm
20 Hz – 20 kHz: 5,000
8 Ohm
20 Hz – 20 kHz: 6,000

Required AC Mains: Universal AC input, 100-240VAC (±15%), 50/60 Hz. Max. AC mains voltage 277VAC.
AC Line Connector: USA, UK, European, Australia, India

Construction
Ventilation: Flow-through ventilation from front to back
Cooling: Dual-zone, microprocessor controlled, continuously variable speed fans
Mounting: 19″ rack mountable